Check Out: How Ghost 2 Immobiliser Is Taking Over And How To Stop It

Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The revolutionary Ghost immobiliser protects your precious vehicle from key-long theft and relay theft. Your car won't be able to start if someone doesn't know your PIN code.

It also has Transport Mode that allows you to turn off the device temporarily which is ideal for transportation and servicing. The device is then activated by entering another PIN code.

No Key Fobs or Indicators with Leds

The Ghost 2 immobiliser is a technological breakthrough in the field of automotive security that provides a strong defense against the latest methods of car theft. Its undetectable installation and engine start blockage will reduce the risk of your vehicle being stolen, which can provide peace of mind, and may even save you money on insurance premiums.

It does not emit radio frequency signals, which makes it inaccessible to traditional scanners. It is also not hacked by using standard methods like key cloning or signal jamming. The device makes use of buttons in your vehicle, like those found on the steering wheel and door panels, to generate a unique PIN code that can be altered. This sequence could last for up to 20 times. Only the owner of the vehicle will be capable of starting the engine if the correct sequence or beacon or mobile application is employed. This provides an extra layer of protection against thieves.

You can also activate an easy service mode in cases such as valet parking or servicing, which requires you to temporarily disable your system. The mobile app makes it simple to do this, and ensures that your vehicle is protected when it is being serviced. After the task is completed it is simple to switch back to secure mode. This will ensure that your vehicle is secured throughout the day.

In  have a peek at this site  to other aftermarket immobilisers that use fobs The Ghost 2 can be operated directly via the existing buttons, making it simpler to use than traditional systems. The app can also act as a spare key for emergency situations, allowing you to drive your vehicle with the security shut off without needing to enter your PIN code.

No Radio Frequency Signals

The Ghost 2 immobiliser is not like other security systems which require an additional remote control. It is operated using the existing buttons on the console or steering wheel. The device is unnoticeable by thieves who use RFID scanning technology or code grabbing, so your car won't start for them if they manage to get your key.

The device employs an unique password sequence of buttons to secure the engine. This PIN code is entered either on the app, or using the buttons on the steering column or the centre console. This will allow you to secure the gearbox as well which means that your car can't be taken away unless you have a key or able to enter your pin code. The device can be set to Transport mode, which lets you drive your vehicle without entering the pin code, and also providing your vehicle with extra protection when it's used for valet parking or service.

The Ghost 2 immobiliser was designed to be as discrete as possible as a theft deterrent. This is a great choice for those who have invested a lot on customising their cars, or have expensive or rare vehicles. Many have stated that the device is an excellent option to stop their cars from being stolen. Some have even told stories of attempted car thefts that were foiled by it. The Ghost 2 is also very versatile. Users have reported that it can be used with their regular keys as well as with the emergency button on their vehicle, providing them with peace of mind when they're away from their vehicle.

No Radio Frequency Scanners

Secure your vehicle from hacking, key cloning, and theft by installing a Ghost immobiliser. The system uses the buttons on your dashboard and steering wheel to create a unique sequence of buttons that only you know. Without this sequence, your car cannot start. This unique combination of a sequence of disarming and the absence of radio frequency signals make the device extremely difficult to penetrate or bypass.

The Ghost CAN Immobiliser is a safer alternative to devices approved by Thatcham that rely on radio frequency scanning. It works completely silently and without external signals and doesn't rely on any external signals. It's a far safer alternative and also offers insurance-approved status when it's installed by an TASSA approved installer (we're one of them! ).

Because of and way in which the Ghost immobiliser is integrated into your vehicle, it is strongly recommended that a professional installer carry out its installation. This will ensure that it is seamlessly connected to your vehicle's systems, resulting to optimal performance and reduced risk of malfunction.

Professional installation is usually supported by warranties and service to increase the value of your purchase. This is a major deterrent to would-be thieves who are less likely than before to try and bypass the device due to its numerous security features.

The Ghost is not only a great deterrent to thieves, but it's designed to be easy to use. It can be configured to automatically re-arm after a certain period of time, meaning you don't have to recollect your PIN code every time you park your vehicle. It offers a Service/Valet mode if you want to leave your car to valet parking or for servicing.  ghost immobiliser cost  can be enabled and turned off using a simple indicator sequence.

No Wire Cutting

The Ghost 2 is non-invasive and doesn't require wire cutting during installation. It connects to the vehicles CAN data network and is programmed with a unique PIN, preventing anyone else from starting your engine if they do not have a personal PIN sequence or app authorization.

It's also silent since it doesn't emit radio signals like other immobilisers. It's weatherproof, sealed, and tiny enough to be concealed anywhere inside the vehicle making it near impossible to locate.

The Ghost II also has the ability to be put into 'transport mode, which allows it to be used for short durations of time without the requirement of a personal PIN. This is great for situations like lending the vehicle to a friend or family member or in emergencies which allows you to start your vehicle and drive away quickly and safely.

When installing the Ghost II, it's important to be in a well-lit area and wear safety gear for working with tools and electrical components. A basic set of hand tools will enable you to make precise connections, while a multimeter can help check electrical values and make sure your wiring is safe. Insulation tape and cable ties can also be used to protect or rejoin any exposed or cut wires that are exposed during the installation process.

It is crucial to disconnect the battery in your vehicle before beginning any wiring work. This will prevent any accidental airbag deployments or electrical shocks from happening if the battery is accidentally disconnected while the Ghost II is still connected to the vehicle's system.

Easy to Install

The Ghost immobiliser is a unique next-generation device that operates by connecting directly to your vehicle's CAN Data Network and using a personalised PIN Code to prevent your vehicle from starting. This makes it much harder to hack than conventional key fobs and alarm systems and offers superior protection against key cloning hacking, as well as relay attacks.

The unit can be concealed inside your vehicle. it makes use of the buttons on your steering wheel and dashboard to create a unique sequence you are the only one to know. This stops thieves from using a stolen car key to start it and also wards off the use of an instrument for diagnosing that thrives on hacking OBD.

Installation is easy and does not require cutting wires. The unit is connected to the vehicle's CAN bus using a continuous 12V supply and a grounding connector. Hand tools of a basic nature are sufficient to install the unit, and a multimeter can assist with pinpointing the correct wires. Insulation tape or heat shrink tubing is recommended to safeguard the connections and cable ties can be used to keep the wiring tidy and tidy.

After installation, the unit enters into a learning mode which records your specific buttons or sequences to create your own unique pin code. This information is then stored in the CAN data network, making it virtually impossible for anyone else to replicate your sequence and start your car.

If you forget your PIN Code or sell your car an option becomes unavailable, there is an emergency override function known as Transport Mode. This will disable the Ghost System completely, however it will automatically reactivate when you exceed 31mph for more than 15 minutes, or enter your PIN Code. This is perfect for those who rent their cars regularly through services such as Turo or ZipCar.